Product Help
Hardware
Formovie THEATER's audio is designed from Sound by Bowers & Wilkins. Nets, large capacitors, patented honeycomb pipes, the choice of luxury cars and professional enthusiasts, with Dolby ATMOS, bringing shocking hearing feelings.
Yes, Formovie THEATER has a contrast of 3000: 1, the ultra -high specification HDR standard used by professional directors, Dolby Vision, and color boundaries are clearly visible, allowing the eyes to grasp each detail and support the three major HDR format standards. Dolby Vision, HDR10+, HDR10 decoding.
Formovie THEATER has BT.2020 ultra -wide color gamut, 1.07 billion color display, color transition is more delicate, display images are closer to the real natural view
Formovie THEATER supports far-field Voice.
The lens of Formovie THEATER is made of glass + resin.
Formovie THEATER supports 4 and 8 points of manual keystone correction.
Formovie THEATER supports WiFi6.
Formovie THEATER does not support side throw function.
Formovie THEATER has a built -in two speakers, with a total output power of 30W, which can be used as an independent Bluetooth speaker. After entering the Bluetooth mode, you can use your mobile phone to connect.
How to enter the Bluetooth speaker mode : Press the keys on the top right of the remote control or press the peak logo menu key point setting to enter Remotes & Accessories for Bluetooth connection.
The maximum power consumption of the whole machine is about 350W.
Trouble-shooting
① After clicking the on button, if the indicator light it is not on, change your power socket to check whether it's a socket problem; ② Try to unplug the power cable, and re-connect the power after 2 minutes. Click the on button on the remote control and if the indicator light still doesn't switch on, please take an after-sales detection. ③ If the indicator lights up after clicking, and the brightness of the projected object changes but still cannot enter the system, try to enter recovery mode to clear the data, and then power on again. The way to enter is as follows: Turn off the laser projector, then unplug the power button. Press and hold the confirm button and return button on the remote control at the same time after shutting down, then plug in the power button. (Do not click the power button of the projector host and remote control), wait for the projector to enter Recovery mode Release the remote control button. ④ If the above methods cannot solve the issue, please apply for after -sales service.
① Guide user to switch to the movie viewing mode, or highlight mode; ② Upgrade the system version; ③ If there is a color problem after the TV switches to the interface of the set-top box or external HDMI device, please check whether the TV and the set-top box are connected. Or, check whether there is a color problem in the screen of the set-top box; ④ Apply for on -site inspection after -sales.
The abnormality of wireless screen projection may be affected by the network, copyright, system, etc. The specific reasons are as follows: ① The projector and the mobile device are not on the same local area network. If the mobile phone is connected to mobile data, and the projector is connected to WiFi, the wireless screen cannot be achieved; ② The content is not supported by copyright protection. Some video content is protected by copyright and only supports viewing by the relevant client; ③ If there is a problem with the system operation, you can restart the relevant equipment and restore the network settings before trying the screen; ④ Network instability will affect the screening, and users can check the network status.
For blurred screen: switch to other pages, or run third-party software to see if the screen is still blurred. ① If a blurred screen also appears in other pages, it may be a hardware or driving problem, please refer to the following: -Restart the laser projector, -Update system; - Or reset; -Implement after-sales testing. ② If other pages are displayed normally, it may be an abnormality of the current output source selected, or the current screen decoding is abnormal. Please refer to the following: -If connected to a set-top box or other HDMI devices, please check the problems of the set-top box and other HDMI devices, or whether the connection/interface is poorly exposed; -If a blurred screen appears to play video, it belongs to the abnormal video image decoding. Please prefer to upgrade the software version, such as updating the system or using a third-party video player. Vague and unclear for the picture: ① If all the interfaces (including fonts, images, and software interfaces) have blur problems, please upgrade the laser projector, or apply for after-sales testing; ② If the individual page is blurred, it may be a page UI problem; ③ If the picture is blurred in the video, you can try to switch the video resolution, or it belongs to the poor picture quality of the video itself; ④ If the laser projector is connected to a set-top box or an external HDMI device, and the screen blurs after the interface appears, please check the related settings (such as the output resolution) of the HDMI device.
① It should be verified whether the user is available for all interfaces. If it is a certain interface or in a certain scenario, it may be related to the scene. ② If all interfaces are available, confirm the location and size, and guide users to replace the projection environment such as: mobile projection position, check whether the bad point moves with the light to eliminate environmental problems. ③ If the above methods cannot be solved, please apply for after-sales service illustration: Unqualified standard: Highlights, in the valid area, the gray stage screen or blue picture allows 1 highlight; Dark dots are not visible in the dark field ash 10 pictures, allowed. Solution: Defect within specification and explain to users. Out of the specification, replace the projector optical machine;
The abnormality of wireless screen projection may be affected by the network, copyright, system, etc. The specific reasons are as follows: ① The projector and the mobile device are not on the same local area network. If the mobile phone is connected to mobile data, and the projector is connected to WiFi, the wireless screen cannot be achieved; ② The content is not supported by copyright protection. Some video content is protected by copyright and only supports viewing by the relevant client; ③ If there is a problem with the system operation, you can restart the relevant equipment and restore the network settings before trying the screen; ④ Network instability will affect the screening, and users can check the network status.
①First, determine under what circumstances the user is stuck, and provide guidance based on the user's operation situation. For example, if the user is stuck while watching an online video, you need to check for network problems. ② Update system: Guide the user to check whether the version of the system is the latest version, which can be judged according to the update prompts in the user system. ③ Ask the user if the laser projector has been rooted. If the system has been rooted, you need to cancel the root before trying it; ④ Enter the projector's background interface and clean up the programmes running in the background, or enter the TV butler to clean up memory and garbage. ⑤ Reset the laser projector's factory settings (not save software), or enter the recovery mode to select all data; ⑥ If the above methods cannot resolve the problem, perform an after-sales test and the specific situation shall prevail after the after-sales test results.
① Check whether the WiFi name has special characters, modify the router wifi name and password to English/digital type, and try to connect again. ② If this WIFI has been connected before, please check whether the wifi password is correct. Select the WIFI name, right click on remote control and select "ignore this network", then re-enter the password. ③ Check whether the router opens the DHCP function. If DHCP is turned off, the TV cannot automatically obtain the IP address. ④ Check whether the router limits more terminal access. If the router only allows the white list device to access the WiFi, add the MAC address of the TV to the white list and try to connect. ⑤ Check whether the TV can be connected to another WIFI network (such as the hotspot a mobile phone): if you can connect, please restart or reset the router; ⑥ If you cannot connect, please restore the television factory settings before trying to connect to WIFI.
Manual
Ⅰ. Function introduction/explanation
Projection in the case of signal source input, HDMI EDID default for Auto mode, some customers feedback after connecting PS5, some TV sticks and other peripherals, the resolution can not support 4K 60hz, but also can not open HDR and other settings. We analyze the reason for this situation is that EDID is not turned on 2.0/2.1 mode, this article will introduce how to set EDID2.0/2.1 mode.
Ⅱ. Application
1. Formovie Theater
2. Android 11 (RTM4.220307.197)
III. Disclaimer
The images and procedures in this document are screenshots of Android 11 (RTM4.220307.197) pages and related operations. Please refer to the actual page as the steps may differ from the following document due to system update.
Ⅳ. Illustrations
1. PS5, some TV sticks and other peripherals connected to the projection, select the projection of the upper right corner of the signal source button, select to enter the signal source page.
As shown above, my device is connected to the HDMI2 port, so HDMI2 will be lit up in the menu, click on it to go to the Peripherals page.
2. When you enter the Signal Source screen, the current Peripheral System page is displayed. Then press the remote control Settings button and in the pop-up menu page, select Settings.
3. Once Settings is open, select Device Preferences.
4. After opening Device Preferences, select inputs.
5. After opening the inputs, select the HDMI EDID version.
6. After opening the HDMI EDID version, you can see the page has two choices: EDID2.0 and EDID2.1;both modes are available,EDID2.1 is recommended for models with EDID2.1.
- Other notes
None.
A: The Android system utilizes the Google Chromecast function to cast screens. iOS can download third -party wireless screens in the App Store to apply Air Screen for wireless screen casting.
There is no function to support access to network sharing files, but it can be implemented through some apps with VLC multimedia player functions.
Press the remote control settings key or Formovie logo. Open the "About" menu and select "Factory Reset" to restore the factory settings.
① After installing the remote control battery, press the power button on the projector and press the "confirmation'' key on the remote control to start connecting ②Use the remote control in close range to the projector and press the "home" and "menu" buttons simultaneously. Release your hand after hearing a beeping sound. After a successful connection, the projector will display "successful connection" on the screen. Note: During the connection process, please keep the remote control and the projector no more than 20 cm apart.
It has an environmentally friendly polycarbonate shell, spray painted in a metal color
Formovie THEATER does not have a waterproof function, Do not penetrate the projector with liquid. If you want to clean the machine, use a clean cloth to wipe it.
Pure white walls are the most suitable, and pale wall surfaces do not really affect the viewing experience. If a pattern wallpaper is affixed to the wall, it will have slight impact on projection, which is not recommended. In order to improve the viewing experience, you can choose the screen, which can greatly improve the viewing experience.
Not necessarily. It can present the image on any medium. Of course, for a better effect, the use of special screen imaging effects will significantly improve the image.
Since keystone correction is implemented by software, when it's under the black screen, a white shadow will appear around it, which is normal.
Special Questions
Users need to adjust the relevant sound settings according to their needs.
At present, Netflix playback is not supported. No business cooperation permissions have been obtained yet. It can be viewed with an external hard disk box or through a third party, but the viewing experience may not be good.
First, you need to check the network environment. When the network environment is not optimal, the distant voice control will not be smooth. If the language is inconsistent, you need to adjust the language mode. Secondly, it may be related to the IP address being used.
eARC is wider than ARC bandwidth. The bandwidth of ARC transmission is 1MB/second, while eARC is 27 MB/second. This is enough to transmit higher quality sound to deliver a better viewing experience.
The audio is designed by B&W. With Dolby ATMOS, it provides an excellent auditory experience. Audio power is not the key to affecting sound quality performance, the tuning technology is the key. The existing power can totally meet user needs.
The MEMC is automatically closed when Dolby material is played, and the user can choose to open it. In order to achieve the color standard required by Dolby Vision, the brightness of the picture will be slightly darkened to better show the color. Although the brightness is a bit darker, the color is visibly brighter.
Yes, it does. After connecting to HDMI, the content inside will be automatically played without setting items.
You can make a custom image setting: press the remote control settings or the Formovie logo to enter Settings, click Device Preferences to enter the Picture settings. You can adjust the image mode, brightness, contrast, saturation, sharpness, etc. Enter Color Temperature to adjust the three-color ratio.
You can make a custom image setting: press the remote control settings or the Formovie logo to enter Settings, click Device Preferences to enter the Picture settings. You can adjust the image mode, brightness, contrast, saturation, sharpness, etc. Enter Color Temperature to adjust the three-color ratio.
WOW wireless network wake-up function; When a mobile phone and the laser TV are connected to the same wifi, the wireless projection screen can directly wake up the laser TV. WOL function; when the laser TV and another device are in the same LAN, the device can be used to wake up the laser TV. When this function is turned on, the machine is in the standby state and there will be a standby sound. At present, the default value of this function is to be turned on. Whether this function is required is still being negotiated.